Laser Cutting Procedure
Last updated
Was this helpful?
Last updated
Was this helpful?
For Laser("Light Amplification by Stimulated Emission of Radiation") cutting can be done on any surface except Glass and Metal because if we try to laser cut the glass then the glass with shatter and if we try to do laser cutting on a metallic surface then from the metallic surface the laser will again reflect back and it can damage the Laser cutting machine.
We first make a 2 Dimension image or logo in the software called Autocad after that it would look something like the picture below.
After that is done we have to save in .dxf Format, if that is not save in .dxf format then the file can not be imported to the RDWorks software then the file will be of no use.
After that is done we have to import the file in the RDWorks software it would look similar to the picture below.
Then we have to add the material on which we have to laser cut the design and we have to press the Frame button on the laser cutting machine so that we would get an idea that the Laser cutting machine is not going to hover on the material, also we have to adjust the focus of the Laser through the RDWorks software, and the height of the bed.
Then after cutting it would look something like this.
This would be the Final Result.
